The doors and windows sealing strip is the necessary part when install the doors and windows,and it play certain auxiliary role.When talk about the accessories,the sealing strips will come out into our minds.Because as for the doors and windows,the sealing strips play an important function.But there are many detailed problems exists.
Door hardware accessories supplier remind you that the attention should be paid to the doors and windows sealing strips before installation.
1. The sundries, such as mortar, brick chips, wood block, etc., should be carefully checked before the installation.And when the glass is installed, should ensure that the gap between the two sides is even and fixed in time, to prevent collision and shift, and to deviate from the center of the notch.
2. The rubber sealing strip can not be pulled tightly,the prepared lengths should  20-30mm longer than assembled length.When installation,the sealing strips should be installed in the position with keeping the surface smoothly,and should be touched with the glass,glass chute tightly to let the force even around the glass.At the corner of the rubber strip should be inclined to disconnect, and at the break of the injection should be adhered and firmed.
3. When fix the glass with the silicone,should use the rubber strip to hold the glass and leave the space to run the silicone into it.And the depth should not be less than 5mm.
4. The position for installing the wool strip is on the window sash or door sash,or around the frame or sash,which can strengthen the sealing between the frame and sash.
5.  The regulation of the top wool is the important factor to influence sliding doors and windows  and the water density,thus,it is important to choose the correct regulation of the top wool.